Radio Front End Radio 420M Specifications

  TitanMIMO-4S TitanMIMO-4D
RF Receiver
RF Range  300 – 3800 MHz 300 – 3800 MHz

Onboard PLL Settling Time

(50 kHz loop bandwidth, 1ppm, excluding programming time)

20 µs 20 µs
Wideband Noise Floor -100 dBfs -100 dBfs

Sensitivity (Low Band: ≤ 1600 MHz)

(SNR = 5 dB and bandwidth = 200 kHz) 

-103 dBm -103 dBm

Sensitivity (High Band: ≥ 1500 MHz)

(SNR = 5 dB and bandwidth = 200 kHz) 

-90 dBm -90 dBm
Rx Gain Control (Low Band: ≤ 1600 MHz) 79 dB 79 dB
Rx Gain Control (High Band: ≥ 1500 MHz) 73 dB 73 dB
Absolute Maximum Input Power -13 dBm -13 dBm
Wideband Gain Rolloff (Low Band: ≤ 1600 MHz – Typical) 8 dB 8 dB
Wideband Gain Rolloff (High Band: ≥ 1500 MHz –  Typical) 10 dB 10 dB
IMD3 (Low Band: ≤ 1600 MHz) -61 dBc to -56 dBc -61 dBc to -56 dBc
IMD3 (High Band: ≥ 1500 MHz) -50 dBc to -45 dBc -50 dBc to -45 dBc
SFDR 50 dBc 50 dBc
Input Impedance 50 ohms 50 ohms
     
RF Transmitter
RF Range  300 – 3800 MHz 300 – 3800 MHz
Frequency Resolution 2.4 Hz 2.4 Hz

Onboard PLL Settling Time

(50 kHz bandwidth, excluding programming time)

20 µs 20 µs
Wideband Noise Floor -124 dBc/Hz -124 dBc/Hz
Output IMD3 -60 dBc -60 dBc
Spur (Inband) -100 dBc -100 dBc
Spur (Adjacent Channel) -60 dBc -60 dBc
Total Gain Control 70 dB 70 dB
P1 dB Output (Low Band: ≤ 1600 MHz – Typical) 20 dBm 20 dBm
P1 dB Output (High Band:  ≥ 1500 MHz – Typical) 15 dBm 15 dBm
Carrier Suppression (Typical) -50 dBc -50 dBc
Sideband Suppression (Typical) -45 dBc -45 dBc
Output Impedance 50 ohms 50 ohms
     
RF Reference TCVCXO (Onboard)
Tunable, 30.72 MHz, temperature-compensated oscillator    
Phase Noise (1 kHz @ 6 GHz) -106 dB/Hz -106 dB/Hz
Phase Noise (10 kHz @ 6 GHz) -121 dB/Hz  -121 dB/Hz 
Phase Noise (100 kHz @ 3 GHz) -122 dB/Hz  -122 dB/Hz 
Phase Noise (1 MHz @ 3 GHz) -130 dB/Hz  -130 dB/Hz 
Tuning Voltage Variation 6 – 18 ppm 6 – 18 ppm
Frequency Range Up to 250 MHz Up to 250 MHz
Frequency Output 30.72 MHz 30.72 MHz
     
RF Reference TCVCXO (External)
In/Out Reference Up to 250 MHz Up to 250 MHz

Back to top of page

Subgroup Perseus 6111 Specifications

 

  TitanMIMO-4S TitanMIMO-4D
FPGA Xilinx Virtex-6 LX550T Xilinx Virtex-6 LX550T
64 bit DDR3 SDRAM SODIMM Memory 4 GB 4 GB

16 bit NOR Flash Memory

(For FPGA Images, MicroBlaze Boot Code, User Code)

64 MB 64 MB

8 bit DDR3 SDRAM

(For MicroBlaze FPGA Applications)

128 MB 128 MB
Rear Transition Module Connectivity 28 GTX full-duplex lanes (7x Aurora-4x on MiniSAS) 28 GTX full-duplex lanes (7x Aurora-4x on MiniSAS)
Form Factor Double-width, mid-size AMC (full-size when Radio420Ms installed Double-width, mid-size AMC (full-size when Radio420Ms installed
I/O Expansion Capabilities 2x HPC VITA 57.1 FMC sites + RTM 2x HPC VITA 57.1 FMC sites + RTM

Back to top of page

Non-Distributed System Master Perseus 6113 Specifications

  TitanMIMO-4S TitanMIMO-4D
FPGA Xilinx Virtex-6 SX475T N.A.
64 bit DDR3 SDRAM SODIMM Memory 4 GB N.A.

16 bit NOR Flash Memory

(For FPGA Images, MicroBlaze Boot Code, User Code)

64 MB N.A.

8 bit DDR3 SDRAM

(For MicroBlaze FPGA Applications)

128 MB N.A.
Rear Transition Module Connectivity 28 GTX full-duplex lanes (7x Aurora-4x on MiniSAS) N.A.
Form Factor Double-width, mid-size AMC (full-size when Radio420Ms installed) N.A.
I/O Expansion Capabilities 2x HPC VITA 57.1 FMC sites + RTM N.A.
     

Back to top of page

Distributed System Master Kermode-XV6 Specifications

 

  TitanMIMO-4S TitanMIMO-4D
FPGA N.A. 8x Xilinx Virtex-6 SX475T
DDR-3 SDRAM SODIMM Memory N.A. 16x up to 4 GB each
I/O Expansion Capabilities N.A. 4x HPC VITA 57.1 FMC sites
ATCA Backplane Support N.A.  Zone 1, 2 and 3

Back to top of page